Author:Jamie Birkett

Ceramic Diplexer

Model No. : N/A Overview The LEN Ceramic Diplexers (also known as Duplexers and/or Filters) are specifically designed and manufactured for each application. LEN have simplified the production process and can often deliver the finished product within a few days of the initial enquiry. Please send us your requirements and we will be pleased to […]

Read More

Power Stripper

Model No. : LPCS01 Overview On one end-plate there is a female BNC input connector for the cable carrying the combined power and video. The other end-plate carries a male XLR for the power output and a female BNC connector for the video output. Power input from the cable with the combined signal: 48V DC, […]

Read More

Power Injector

Model No. : LPCI01 Overview On one end-plate there is a female XLR for the power input and a female BNC connector for the video input. The other end-plate carries a female BNC connector for the output to the cable carrying the combined power and video. Power input: 48V DC maximum, 4A maximum. Features Video […]

Read More

Video Isolation Transformer, Analogue, Fire-safe housing

Model No. : LVIT03 Overview This heavy-duty model contains the same circuitry as the LVIT01, but is built in a metal ‘fire-safe’ housing, for such applications as public transport, military and marine environments. The outer casing is made of die-cast aluminium and the overall construction has increased NVH protection. Particular attention is given to minimising […]

Read More

Video Isolation Transformer, Analogue, 4kV breakdown

Model No. : LVIT02 Overview The LEN Video Isolation Transformer acts as BOTH a Hum Eliminator AND a Ground Isolator whilst also improving on the performance of the traditional individual products. The LVIT02 will remove severe interference caused by 50 or 60 Hz hum whilst a normal “Humbucker” will only remove moderate interference. At the […]

Read More

Video Isolation Transformer, Analogue

Model No. : LVIT01 Overview The LEN Video Isolation Transformer acts as BOTH a Hum Eliminator AND a Ground Isolator whilst also improving on the performance of the traditional individual products. The LVIT01 will remove severe interference caused by 50 or 60 Hz hum whilst a normal “Humbucker” will only remove moderate interference. At the […]

Read More

Video Hum Eliminator – Analogue

Model No. : LVHE01 Overview The LEN mains Hum eliminator (commonly known as a Humbucker) is inherently transparent to a video signal, causing minimal differential phase or gain distortion. It also does not block DC control signals and feeds. NOTE: If your application also requires protection from the effects of variation in ground potential, or […]

Read More

Video Hum Eliminator – HD SDI

Model No. : LHDVHE01 Overview For use with HD, SD SDI and ASI video.  Impedance: 75 ohms. Features Equivalent cable length, working with SD SDI or ASI: 15m Belden 8281 Equivalent cable length, working with HD SDI: 20m Belden 1694 Amplitude ripple: Better than 0.5 dB, DC to 1485MHz, Group delay ripple: Less than 3nS, […]

Read More

Video Hum Eliminator – 3G SDI

Model No. : L3GVHE01 Overview For use with 3G, HD, SD SDI and ASI video.  Impedance: 75 ohms. Features Equivalent cable length, working with SD SDI or ASI: 15m Belden 8281 Equivalent cable length, working with 3G/HD SDI: 20m Belden 1694 Amplitude ripple: Better than 0.5 dB, DC to 3000MHz, Group delay ripple: Less than […]

Read More

1U Rack Frame for mounting up to 8 off Relays

Model No. : LMPR01 Overview The LMPR01 rack frame is a 1U 19-inch panel, finished in black, punched to take eight relays mounted from the rear by means of the mounting screws, the BNC connectors facing out of the rack. If it is desired to have the connectors facing into the rack, the relays may […]

Read More